All Categories

  • All Categories
  • 3D PRINTING
  • INTERNET OF THINGS
  • Modules
  • ROBOTICS & CNC
  • SENSORS & MODULES
  • STARTER & DIY KITS

4-Axis 3.5A CNC Stepper Motor Driver Board, TB6560

  • $51.99
  • Ex Tax: $51.99
  • Product Code: 101-80-107
  • Availability: In Stock

SPECIFICATIONDimensions: 18 * 11 * 4 cm (L*W*H)FEATURESToshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset .1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step.Adjustable 1.5A-3A drive current settings for each axis - 25,50,75,100 of full current can be set for different stepper motorsOverload, over-current and over-temperature safety - F..

SPECIFICATION

Dimensions: 18 * 11 * 4 cm (L*W*H)

FEATURES
  • Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset .

  • 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step.

  • Adjustable 1.5A-3A drive current settings for each axis - 25,50,75,100 of full current can be set for different stepper motors

  • Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment .

  • On board current switching - Power output can be set according to specific user requirement .

  • Full closed-type optical isolation to protect the user's computer and equipment

  • Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output.)

  • 4 channel inputs interface- Can be used for XYZ limit and emergency stop .

  • Professional design - Two stage signal processing with super anti-jamming .

  • Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect .

  • Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop .

  • Universal architecture - Supports most parallel software MACH3,KCAM4 etc.

Caution

This driver is the 1.5A-3A version, it's specially designed for stepper motors with rated current from 1.5A to 3.5A, it's NOT compatible with stepper motors with rated current below 1.5A or above 3.5A.


WHAT’S IN THE PACKAGE
  • 1x TB6560 Stepper Motor Driver 1.5A-3.5A

  • 6x Wire connectors

  • 1x DB25 parallel cable

  • 1x CD software



T***m 31/07/2019

nice

Write a review

Note: HTML is not translated!
    Bad           Good