All Categories

  • All Categories
  • 3D PRINTING
  • INTERNET OF THINGS
  • Modules
  • ROBOTICS & CNC
  • SENSORS & MODULES
  • STARTER & DIY KITS

4.5A CNC Micro-Stepping Stepper Motor Driver, ST-M5045

  • $35.99
  • Ex Tax: $35.99
  • Product Code: 101-80-109
  • Availability: In Stock

HIGHLIGHTSSuitable for 2-phase hybrid stepper motors (Outer diameter: 57,86mm).H bridge bipolar constant phase flow subdivision driver.Speed self-adjustment technology.Easy current subdivision setting.2--64 resolutions,16 operation modes.ENA mode.8 dial switch for different functions.Undervoltage, Shortvoltage, overvoltage, overcurrent protections.SPECIFICATIONTechnical Parameter:Supply Voltage: 2..

HIGHLIGHTS
  • Suitable for 2-phase hybrid stepper motors (Outer diameter: 57,86mm).

  • H bridge bipolar constant phase flow subdivision driver.

  • Speed self-adjustment technology.

  • Easy current subdivision setting.

  • 2--64 resolutions,16 operation modes.

  • ENA mode.

  • 8 dial switch for different functions.

  • Undervoltage, Shortvoltage, overvoltage, overcurrent protections.


SPECIFICATION
  • Technical Parameter:Supply Voltage: 24~50V DC (Typical 36 V).

  • Output Current (peak): Min 1.0 A, max 4.2A.

  • Logic Input Current: Min 7, typical10, max 16 mA.

  • Pulse Frequency: Max 200 KHz.

  • Pulse Low Level of Time: 2.5 μS.

  • Cooling: Natural /mandatory.

  • Working Surrounding: Avoid dust, oil mist and corrosive gas.

  • Storage Temp: -10---80 ;14~176℉.

  • Working Temp: Max 65 . 149℉

  • Surrounding Humidity: <80RH without condensing and frost.

  • Vibration: 5.9m/s2.

  • Model: ST-M5045 (2M542)


WHAT’S IN THE PACKAGE

1x ST-M5045 (2M542)CNC Stepper Motor Driver (1.0A-4.5A)


There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good