All Categories

  • All Categories
  • 3D PRINTING
  • INTERNET OF THINGS
  • Modules
  • ROBOTICS & CNC
  • SENSORS & MODULES
  • STARTER & DIY KITS

Dual Z-Axis Upgrade Kit for CR-10 Standard

  • $49.99
  • Ex Tax: $49.99
  • Product Code: 101-91-A17
  • Availability: In Stock

SPECIFICATIONLead Screw:Material: metal Length: 51.5cm/ 20.3in Diameter: 0.7mm Weight: 160g/ 5.7oz Stepper Motor:Number of Phase: 2 Rated Voltage: 3.6V DC Rated Current: 1 Amp Holding Torque: 0.48 Nm Typ. (Two phase on/rated current) Phase Resistance: 3.6 ohm±10 (20) Phase Inductance: 8 mH ± 20 (1kHz 1V rms) Rotor Inertia: 57 gcm^2 Motor Weight: 0.28kg Insulation Class: B (130) Step Angle: 1.8 ± 5..

SPECIFICATION
Lead Screw:
  • Material: metal

  • Length: 51.5cm/ 20.3in

  • Diameter: 0.7mm

  • Weight: 160g/ 5.7oz

Stepper Motor:
  • Number of Phase: 2

  • Rated Voltage: 3.6V DC

  • Rated Current: 1 Amp

  • Holding Torque: 0.48 Nm Typ. (Two phase on/rated current)

  • Phase Resistance: 3.6 ohm±10 (20)

  • Phase Inductance: 8 mH ± 20 (1kHz 1V rms)

  • Rotor Inertia: 57 gcm^2

  • Motor Weight: 0.28kg

  • Insulation Class: B (130)

  • Step Angle: 1.8 ± 5 / Step

Installation Guide


WHAT'S IN THE PACKAGE
  • 1x 34mm Stepper Motor

  • 1x Z Motor Bracket with Screws and T-nuts

  • 1x Lead Screw

  • 1x Lead Screw Bracket with Brass Nut

  • 1x Lead Screw Top Bearing Bracket

  • 1x Z Coupler

  • 3x Longer m6 screws

  • 3x M6 nuts and spacers

  • 1x Motor Cable


    h***4 20/06/2019

    love

    l***y 20/06/2019

    Very good

    t***b 20/06/2019

    So so nice

    Write a review

    Note: HTML is not translated!
        Bad           Good